High-Efficiency Lithium Slag Dryer for Spodumene & Lepidolite Residue
The lithium slag dryer is specialized drying equipment engineered to dewater and dry residue discharged after lithium extraction from spodumene and lepidolite. Lithium slag typically features high initial moisture content (25%–40%), fine particle size, strong stickiness, and noticeable corrosiveness. Manufactured by Henan Hongke Machinery, our rotary drying system uses high-temperature rapid drying to reduce slag moisture below 8%, turning industrial waste into valuable resources.
Optimized thermal design and insulation minimize heat loss, while well-arranged lifting flights extend material retention time and boost moisture evaporation intensity per unit volume.
Built with wear-resistant steel plates, anti-corrosion linings or corrosion-resistant materials, and wear-treated lifting flights and end seals to withstand residual acids, alkalis, and salts in lithium slag.
Equipped with internal self-cleaning mechanisms and specialized lifting flight structures to prevent fine, sticky lithium slag from adhering or clogging during continuous operation.
Final moisture can be accurately controlled with uniform particle distribution, while tight system sealing and high-efficiency dust collection (cyclone + baghouse or wet scrubber) keep dust emissions compliant.
Compatible with natural gas, pulverized coal, heavy oil, biomass pellets, and waste steam heat so plants can choose the most economical fuel locally.
Covering 2–46 t/h across 14 standard specifications (11–400 kW), supplied directly by Henan Hongke Heavy Machinery Co., Ltd. with tailored engineering support.
The prepared zinc-bearing raw materials (mixed with reducing agents like pulverized coal) are fed into the upper end of the inclined secondary zinc oxide rotary kiln. As the cylinder rotates slowly at 0.5–3.0 rpm,materials advance downward through the thermal zones. Coal or gas combustion at the kiln head generates high temperatures (1100°C–1350°C),causing zinc compounds to be reduced into metallic zinc vapor,which volatilizes and exits with flue gas. The vapor is then oxidized and captured as high-purity zinc oxide powder in the dust collection system,while slag discharges from the lower end.
Process Flow & Working Principle Diagram
*Note: Standard specifications are listed below. Henan Hongke Heavy Machinery Co.,Ltd. offers customized dimensions and configurations based on your specific plant scale.
| Model Spec (m) | Diameter (m) | Length (m) | Inclination (%) | Capacity (t/d) | Speed (r/min) | Motor Power (kW) | Action |
|---|---|---|---|---|---|---|---|
| Φ2.5×40 | 2.5 | 40 | 3.5 | 180 | 0.44-2.44 | 55 | Inquire |
| Φ2.5×50 | 2.5 | 50 | 3 | 200 | 0.62-1.86 | 55 | Inquire |
| Φ2.5×54 | 2.5 | 54 | 3.5 | 204 | 0.45-1.45 | 55 | Inquire |
| Φ2.7×42 | 2.7 | 42 | 3.5 | 320 | 0.10-1.52 | 55 | Inquire |
| Φ2.8×44 | 2.8 | 44 | 3.5 | 400 | 0.437-2.18 | 55 | Inquire |
| Φ3.0×45 | 3.0 | 45 | 3.5 | 500 | 0.5-2.47 | 75 | Inquire |
| Φ3.0×48 | 3.0 | 48 | 3.5 | 700 | 0.6-3.48 | 100 | Inquire |
| Φ3.0×60 | 3.0 | 60 | 3.5 | 300 | 0.3-2 | 100 | Inquire |
| Φ3.2×50 | 3.2 | 50 | 4 | 1000 | 0.6-3 | 125 | Inquire |
| Φ3.5×54 | 3.5 | 54 | 3.5 | 1500 | 0.55-3.4 | 220 | Inquire |
| Φ4.0×60 | 4.0 | 60 | 3.5 | 2500 | 0.396-3.96 | 315 | Inquire |
| Φ4.8×74 | 4.8 | 74 | 4 | 5000 | 0.396-3.96 | 630 | Inquire |
| Φ6.0×95 | 6.0 | 95 | 4 | 10000 | Max 5 | 950×2 | Inquire |
Detailed View of Core Components & Internal Craftsmanship
Advanced automated multi-point thermal monitoring prevents over-burning or under-calcination.
Optimized internal flight lifters and heavy-duty spring seals drastically reduce thermal loss.
Full-process support from 3D plant design and manufacturing to overseas site installation.
Connect with our engineering experts directly. Receive factory pricing and technical proposals within 12 hours.